Perdure E02

$149.95$1,274.95

Epoxy primer for concrete and masonry surfaces

Perdure E02 is industrial grade epoxy primer for concrete, plywood, ceramic tile or any hard wearing surfaces. It exhibits excellent adhesion and stops outgassing.

Brand:Duraamen

Description

Perdure E02 is industrial grade epoxy primer for concrete, plywood, ceramic tile or any hard wearing surfaces. Exhibits excellent adhesion and stops outgassing. It combines the properties of water insensitivity with good wetting properties. It provides excellent filling and sealing properties needed under high-performance epoxy floor coatings on concrete. The moisture tolerance of Perdure E02 allows it to be applied to damp concrete after surface preparation. This includes bonding “old to old” or “new to old” concrete.

Features

  • Low modulus – stress relieving
  • Fast cure formulation available for priming undercoatings
  • Moisture insensitive cure
  • Conforms to ASTM C-881 requirements
  • Low viscosity-good wetting properties

Additional information

Weight N/A
Dimensions N/A
Size

1.50gal, 3.00gal, 15.00gal

Technical Details

Viscosity @ 75°F 400 – 450cp Pot Life 30-40 minutes @ 75°F
Mixing Ratio 2 parts A to 1 parts B by volume Dry to Touch 6–8 hours @ 75°F
Solids Content 100% Solids by volume Re-Coat (regular cure) 10–12 hours @ 75°F
Volatile Organic Content 0 Re-Coat (fast cure) 4-6 hours @ 75°F
Gloss, 60°F Low sheen Full cure, maximum resistance 5 Days
Weight Per gallon 9.00–9.50 pounds per gallon, mixed

Reviews

There are no reviews yet.

Be the first to review “Perdure E02”

Your email address will not be published. Required fields are marked *

Download Technical Data & Color Sheets