Products Link to Contact Page

POLYURETHANE

Perdüre U45  Water-based icon  Chemical Resistant  Scratch Resistant  UV Stability

Perdüre U45 is a two-component water-based aliphatic (non-yellowing) polyurethane. Perdüre U45 is free of the health and environmental problems normally found in solvent-based urethanes, while maintaining excellent performance. It is a high performance coating for use in variety of seamless floor and wall coating systems.

Perdüre U45 gives a matte finish. It has good chemical, stain, and mar resistance. In addition, it’s easy to clean and has excellent color retention under heavy foot traffic. It is ideal for topcoats and finishes that require high abrasion resistance. Typical application areas are clean rooms, hospitals, pharmaceutical facilities, stained concrete, wood floors and as a seal coat for most düraamen’s floor and wall coating systems

advantages

  • Excellent abrasion resistance
  • Excellent chemical and stain resistance
  • Suitable for both exterior and interior applications
  • May be used for both horizontal and vertical applications
TECHNICAL DATA CURE/DRY TIME
Viscosity after 15 minutes @ 77°F 500 – 600cps Dry to Touch 2hours @77°F, 50%RH
Viscosity after 30 minutes @ 77°F 600cps Re-Coat 4 hours @ 77°F
50%RH
Mixing Ratio - Clear 4 parts A to 1 parts B by volume Light Traffic 16-24 hours @ 77°F
Solids Content Clear 43% by volume Full Core 4-5 days
Volatile Organic Content <0.10 lb/ga    
Pot Life 1 ½ – 2hr @ 77°F, 1qt
45min @ 95°F, 1qt 		   
  •  
  •  
  •  
<hr /> duraamen rule image

Perdüre U46  Water-based icon  Chemical Resistant  Scratch Resistant  UV Stability

Perdüre U46 is a two-component water-based aliphatic (non-yellowing) polyurethane. Perdüre U46 is free of the health and environmental problems normally found in solvent-based urethanes, while maintaining excellent performance properties. It is a high performance coating for use in variety of seamless floor and wall coating systems.

Perdüre U46 gives a gloss finish. Perdüre U46 has good chemical, stain, and mar resistance. In addition, it’s easy to clean and has excellent color retention under heavy foot traffic. It is ideal for topcoats and finishes that require high abrasion resistance. Typical application areas are clean rooms, hospitals, pharmaceutical facilities, stained concrete, wood floors and as a seal coat for most düraamen’s floor and wall coating systems.

advantages

  • Low odor during application and cure
  • Fast dry and re-coat time
  • Low VOC
  • Excellent adhesion
  • Excellent abrasion resistance
TECHNICAL DATA CURE/DRY TIME
Viscosity after 15 minutes @ 77°F 500 – 600cps Dry to Touch 2hours @77°F, 50%RH
Viscosity after 30 minutes @ 77°F 600cps Re-Coat 4 hours @ 77°F
50%RH
Mixing Ratio - Clear 4 parts A to 1 parts B by volume Light Traffic 16-24 hours @ 77°F
Solids Content
Clear		 43% by volume Full Core 4-5 days
Volatile Organic Content <0.10 lb/ga    
Pot Life 1 ½ - 2 hr @ 77°F, 1qt
45min @ 95°F, 1qt 		   
  •  
  •  
  •  

<hr /> duraamen rule image

Perdüre U50  Solvent-based icon  Chemical Resistant  Scratch Resistant  UV Stability

It is a two-component, chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention. Perdüre U50 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in garages, restaurants, warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Perdüre U50 is used as a finish coating option for most düraamen™ flooring systems.

advantages

  • Excellent abrasion resistance
  • Excellent chemical and stain resistance
  • Suitable for both exterior and interior applications
  • May be used for both horizontal and vertical applications
TECHNICAL DATA CURE/DRY TIME
Viscosity after 15 minutes @ 77°F 700 – 900cps Pot Life 8 hours @ 77°F
Mixing Ratio - Clear 2 parts A to 1 parts B by volume Dry to Touch 10-14 hours @ 77°F
Solids Content
Clear		 56% (clear) 65% (pigmented) Re-Coat 12-16 hours @ 77°F
Volatile Organic Content 405 gm/L Light Traffic 16 hours @ 77°F
Weight per gallon 10.5 lb/ga, mixed Full Core 5-10 days
  •  
  •  
  •  

<hr /> duraamen rule image

Perdüre U50+

Perdüre U50+ is a two-component, chemical resistant, high solids aliphatic polyurethane coating. It is a very low VOC coating that meets all federal and state environmental air quality standards. The high gloss or satin finish offers excellent abrasion resistance, chemical and stain resistance. It can be used equally well on vertical or horizontal surfaces. It is ideal for flooring systems in warehouses, storage facilities, vehicle maintenance facilities, aircraft hangars, animal housing, restrooms, restaurants and numerous other coating applications. It is available in clear and pigmented, gloss and satin formulations. For use in high traffic/high wear applications, optional additive is available.

ADVANTAGES

  • Excellent abrasion resistance
  • Excellent chemical and stain resistance
  • Suitable for both exterior and interior applications
  • May be used for both horizontal and vertical applications
  • Compliant to low VOC Air Regulations
  • Low odor
TECHNICAL DATA CURE/DRY TIME
Hardness (ASTM D3363 Pencil) 2H – 3H Pot Life 45 mins @ 75°F,
50% RH
Abrasion Resistance ASTM D4060 10-20mgs/1000cycles, CS-17 Wheel Dry to Touch 5-7 hours @ 75°F,
50% RH
Solids Content
Clear		 90% (clear) 93% (pigmented) Re-Coat

8–10 hours @ 75°F,
50% RH
Volatile Organic Content 100gm/L – Compliant in all US states, except Los Angeles SCAQMD counties Light Traffic 16–24 hours @ 75°F,
50% RH
Dry Film Thickness 2.8-2.9 mils @ 500ft2/gal application rate Full Core 5–7 days
  •  
  •  
  •  
Self-leveling concrete