Products Link to Contact Page

epoxy

Perdüre E32  Water-based icon

It is a water based emulsion epoxy primer/sealer designed to have a maximum penetration into concrete surfaces to provide high bond strength and adhesion. Specially formulated to reduce concrete out gassing, Perdure E32 has the ability to be applied to recently poured (green) concrete and achieve excellent adhesion. Perdure E32 has very low odor and can be used in occupied areas. Ideal for both new and old concrete surfaces, Perdure E32 is used as a primer for Perdure high build and thin film coating systems.

advantages

  • Low odor during application and cure
  • Fast dry and re-coat time
  • Easy clean-up
  • Can be used on damp/green concrete
  • Greatly reduces the probability of concrete out gassing
TECHNICAL DATA CURE/DRY TIME
Viscosity @ 75°F 300 – 400cps Pot Life 3 hours
Mixing Ratio 2 parts A to 1 parts Bby volume Dry to Touch 4 – 6 hours @ 75°F
 Solids Content 38-40% by volume Re-Coat 6 – 24 hours @ 75°F
Volatile Organic Content <60 gm/L Light Traffic 24 hours @ 75°F
Bond Strength to concrete 400-500psi (100% concrete failure) “H” hardness 2 days
Weight Per gallon 8.75 pounds per gallon, mixed “5-H” Hardness 30 days
<hr /> duraamen rule image

Perdüre E12  UV Resistance  Chemical Resistance

It is a 100% solids epoxy glaze specially formulated for excellent clarity and water-white appearance. It is resistant to ultra violet (UV) exposure. Perdure E12 provides a wear and abrasion resistant finish that resists the normal ambering of epoxy finishes. With low odor and minimal health risks, Perdure E12 is the ideal seal coat for concrete and polymer concrete overlays.

advantages

  • Excellent clarity and color retention
  • Low odor during application and cure; can be applied in occupied buildings
  • UV Resistant epoxy finish
  • Meets USDA requirements for food handling applications
TECHNICAL DATA CURE/DRY TIME
Viscosity @ 75°F 800 – 1000cps Pot Life 20-30 minutes @
75°F
Mixing Ratio 2 parts A to 1 parts B by volume Dry to Touch 8–10 hours @ 75°F
 Solids Content 100% by volume Re-Coat 14–16 hours @ 75°F
Volatile Organic Content 0 Light Traffic 18 hours @ 75°F
Gloss, 60°F 90–100 “H” hardness 2 days
Weight Per gallon 9.00–9.20 pounds per gallon, mixed “5-H” Hardness 5 days
concrete epoxy products