Products Link to Contact Page

acrylic coatings

Perdure A01

Perdüre A01 is a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Perdüre A01 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust and wear. Providing a surface that is easy to clean and maintain Perdüre A01 is an excellent choice for both interior and exterior applications.

Perdüre A01 is most commonly used as a sealer for Düraamen concrete, epoxy terrazzo and polymeric terrazzo flooring systems. It is also used for sealing old and new concrete floors, exterior ramps, decks, sidewalks, slate and exposed aggregate surfaces.

ADVANTAGES

  • UV resistant
  • Excellent clarity & color retention
  • Low maintenance finish
  • Excellent abrasion & Mar resistance
  • Seals substrate from moisture penetration
TECHNICAL DATA
Viscosity @ 75°F 950cps
Mixing ratio none
Solids Content 20% by volume
VOC 746g/lt
Weight per gallon 7.50–8.0lb/ga
Dry to touch 2-6 hours @ 75°F
Re-Coat 2-6 hours @ 75°F
Full Cure 5 days
  •  
  •  
  •  
<hr /> duraamen rule image

Perdure A03  Water-based  UV Stability

Perdüre A03 is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. It provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. Perdure A03 is an excellent choice for both interior and exterior applications.

The excellent water, alkali, and efflorescence resistance of this product, in combination with its exterior durability and its ability to adhere to a variety of substrates, allow it to be used in many applications. Perdure A03 can be used to seal concrete, masonry, pavers, brick, saltillo tiles, or any cementitious substrate.

ADVANTAGES

  • Hot tire pick-up resistant
  • UV resistant
  • Waterborne sealer
  • Excellent clarity & color retention
  • Low maintenance finish
  • Fast dry time
  • Excellent abrasion & Mar resistance
  • Seals substrate from moisture penetration
TECHNICAL DATA
Weight / gallon 8.5 ± 2
Drying time 15-30 minutes
Re-Coat 2 hour (approx.)
Flash point None (seta flash)
pH 8.5 – 8.9
Solids Weight 20.0%
Package life 1 year, unopened
VOC 0.60 gm/liter
  •  
  •  
  •  
acrylic floor coatings